UralEnergoDetal Plant LLC produces welded parts of pipelines, cold-formed bends and made by induction heating from carbon and alloy steels, according to the Certificates of Conformity (see below).
Welded and bent parts of pipelines are used in the construction and repair of field, trunk, process pipelines, steam and hot water pipelines.
Welded fittings include: concentric and eccentric transitions, bends, equal tees and transitional tees, split tees.
Experienced specialists will provide competent technical advice, help you quickly and efficiently select the necessary products.
For any questions, please contact our managers by phone:
+7 (3439) 24-05-45
Products:
Hot-bent bends:
Hot-bent bends with an outer diameter of D = 57-630 mm, with a bending angle of 1 ° to 90 °, wall thickness S from 8 to 20 mm
Hot-bent bends are made in accordance with regulatory documents
GOST 22793-83 TU 1460-001-88189979-2011
TU 1462-010-88189979-2015 TU 1469-004-88189979-2015
TU 1469-005-88189979-2015 TU 1469-001-05777029-2009
TU 1468-040-20872280-2010 TU 102-488-95 TU 51-515-61
TU 14-1-5598-2011 OST 36-42-81 OST 34-10-750-97 OST
108.321.11.82 OST 108.321.12.82 OST 108.321.13.82 OST
108.321.15.82 OST 108.321.18.82 OST 108.321.19.82 OST
108.321.20.82 OST 108.321.21.82 STO CCTI 10.003-2007
STO CCTI 321.02-2009
Cold-formed bends:
Cold-formed bends with an outer diameter of Dн = 219-530 mm, with a maximum bending angle of 27 °, and a wall thickness of S = 4-18 mm
Cold bends are manufactured in accordance with regulatory documents:
GOST 24950-81
TU 1469-003-88189979-2015
TU 24.20.40-013-88189979-2017
Sectional welded bends:
Sectional welded bends with an external diameter of D = 159-1620 mm, with a radius of R = 1Du-3Du, a bending angle of 15-90 °, a wall thickness of S = 5-25 mm
Section welded bends are made in accordance with the regulatory documentation:
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
OST 34-10-752-97
OST 36-21-77
МН 2880
ТS-583.000
Pipeline nodes:
Pipeline nodes with an outer diameter of Dn = 159-1420 mm.
Made according to customer requirements
Equal and transition welded tees:
Equal / transition welded tees with an outer case diameter D = 76-1620 mm, a case wall thickness S = 5-25 mm, a nozzle outer diameter D1 = 76-1620 mm, a nozzle wall thickness S1 = 3.5-25 mm
Equal / transition welded tees are made in accordance with regulatory documents:
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
TU 24.20.40-013-88189979-2017
OST 34-10-762-97
OST 34-10-764-97
OST 36-24-77
TS-588.000
TS-590.000
Welded tees with overlays with an outer diameter of the housing D = 76-1620 mm, a wall thickness of the housing S = 5-25 mm, an outer diameter of the fitting D1 = 76-1420 mm, a wall thickness of the fitting S1 = 3.5-25 mm
Welded tees with pads are made in accordance with regulatory documents:
Sizes (on the outer diameter of the highway) with a nominal diameter up to and including DN1400
Tees TRS, TRShS are made in accordance with the regulatory documentation:
TU 14-004-88189979-2014
TU 1462-007-88189979-2015
Split tees welded / stamped-welded flange complete with a plug and a blind flange equal / unequal (TRSF, TRShSF):
Operating pressure up to 10.0 MPa inclusive
Sizes (on the outer diameter of the highway) with a nominal diameter up to and including DN1400
Types of Stubs:
- with locking mechanism in the flange
- with locking mechanism on the plug
Tees TRSF, TRShSF are made in accordance with the regulatory documentation:
TU 14-004-88189979-2014
TU 1462-007-88189979-2015
Split tees welded / stamped-welded equal / unequal flange with side branches for equal / unequal bend, including with bend in flange design complete with plug and blind flange (TRSFB, TRShSFB):
Operating pressure up to 10.0 MPa inclusive
Sizes (on the outer diameter of the highway) with a nominal diameter up to and including DN1400
Types of Stubs:
- with locking mechanism in the flange
- with locking mechanism on the plug
Tees TRSFB, TRShSFB are made in accordance with the regulatory documentation:
TU 14-004-88189979-2014
TU 1462-007-88189979-2015
Branch pipes with a reinforcing slip:
Operating pressure up to 10.0 MPa inclusive
Dimensions (outer diameter of the highway)
with a nominal diameter up to and including DN1400
Branch pipes are made in accordance with the regulatory documentation:
TU 14-004-88189979-2014
Weld split tee:
Insertion nodes of type I-V (PN, TRS, TRSF, TRShSF, TRShSF)
D = 300 - 1400 mm
S = 3 - 70 mm up to and including K60
PN up to 10.0 MPa
texpl = -40 C - +60 C
Types of Stubs:
- with locking mechanism in the flange
- with locking mechanism for plugs
TU 14-004-88189979-2014 in accordance with the requirements of STO Gazprom 2-2.3-116-2007
Split tee, welded, stamped-welded (types III, IV) in flange design, complete with plug and blind flange:
Insertion nodes of type I-V (PN, TRS, TRSF, TRShSF, TRShSF)
D = 300 - 1400 mm
S = 3 - 70 mm up to and including K60
PN up to 10.0 MPa
texpl = -40 C - +60 C
Types of Stubs:
- with locking mechanism in the flange
- with locking mechanism for plugs
TU 14-004-88189979-2014 accordance with the requirements of STO Gazprom 2-2.3-116-2007
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
OST 34 10.758-97
OST 34 10.759-97
TS-595.000
TS-596.000
Welded transitions:
Concentric welded transitions from rolled shells with a smaller inner diameter from 325 mm, wall thickness S = 8-16 mm
Concentric welded transitions are made in accordance with the regulatory documentation:
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
TU 24.20.40-013-88189979-2017
OST 34-10-753-97
OST 36-22-77
TS-585
Welded eccentric transitions from rolled shells with a smaller inner diameter from 325 mm, wall thickness S = 8-16 mm
Welded eccentric transitions are made in accordance with the regulatory documentation:
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
TU 1469-005-88189979-2015
OST 34 10-753-97
TS-586
Transitional rings:
Transitional rings with a diameter of D = 57-1620 mm, with a wall thickness of S = 5-25 mm
Transitional rings are made in accordance with the regulatory documentation:
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
TU 24.20.40-013-88189979-2017
Flat plugs:
Flat welded end caps with an external diameter of D = 76-1420 mm, with a wall thickness of S = 5-25 mm
Flat welded plugs are made in accordance with regulatory documents:
TU 1462-001-88189979-2012
TU 1462-002-88189979-2012
OST 34 10.758-97
OST 34 10.759-97
TS-595.000
TS-596.000
